product – SESS

Temperature Range	20°C to 60°C
Temperature Control Accuracy	± 0.1°C
Temperature Uniformity	± 1°C
Humidity Range	40% RH to 95% RH
Humidity control Accuracy	± 2% RH
Humidity Uniformity	± 3% RH

DESCRIPTION

Double walled with 80 mm PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Stand by humidity system
Stainless Steel Trays	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Full length Inner glass door	High speed Ethernet based communication
Illuminated working area	All operations through a single 4″ Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature humidity sensor with 4-20mA output
Forced air circulation for uniform temperature	Safety devices: Low & High temperature cut-off settable thermostats & high humidity cut-off device
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Audio/Visual alarms for deviations
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser	Complete with DQ, IQ, OQ, PQ & Operations & Maintenance Manual

Exterior &Interior is of stainless steel (SS 304)	Capacity		Internal Size	External Size	Tray Qty.	Tray Size	Approx. Weight kg
Exterior &Interior is of stainless steel (SS 304)	Cu. ft.	Liters	H x W x D (mm)	H x W x D (mm)	Tray Qty.	mm	Equip	Ship
PG 430/20 to 60 /RH/A	16	430	1200x600x600	1795x730x1095	3	530×560	250	325
PG 600/20 to 60 /RH/A	21	600	1200x700x700	1795x830x1195	3	630×660	275	350
PG 1000/20 to 60 /RH/A	34	1000	1500x800x800	2095x930x1295	4	730×760	325	425
PG 2000/20 to 60 /RH/A	71	2000	1500x1600x800	2095x1760x1295	8	710×760	375	475

Rain Spray System (Meet IPX3 and IPX4, 4K test)
	(IPX3,4)		(IPX4K)
controller	LCD Touch Screen Display And Controller
Nozzle diameter	0.4 mm	0.8 mm
Nozzle distance	50 mm
Flow rate	0.07 L/min		0.6 L/min +/-0.5 %
Arm Radius in mm	200 mm
Rotating angle	+/- 270,Adjustable
Rotating speed	Adjustable (60 deg per sec)
Rotating table	Speed Is Adjustable (option for – Both deration rotate)
Plate	Adjustable Spray For Flow and Spray Time
Pressure regulator	0- 400 KPA Adjustable
Interior / exterior	SS 304 / MS with Powder Coated

Swing pipe diameter	0.2m, 0.4m, 0.6m, 0.8m, 1.0m (according to the size of the measured object to select the swing pipe size)
Pendulum tube angle	60 degrees ,vertical ± 90 and 180 degrees
Orifice	The removable design, pinhole 0.4 mm, specially designed nozzle, spray rain water pressure 50-150kpa
Testing temperature	Room temperature
Specimen rotate speed	1-3r/min (Adjustable)
Pressure gauge	50-150Kpa
Oscillating angle	IPX3: spray ±60° from vertical line to each side, total 120° IPX4: spray ±180° from vertical line to each side, total 360°
Oscillating speed	IPX3: 2120° for 4s IPX4: 2360° for 12s

Dry Hot Air Oven

Specification	DUST-450	DUST-1000
Chamber volume (Litres)	50	80
Internal Dimensions (WXDXH) (mm)	420mmX395mmX350mm	450mmX400mmX450mm
Internal Dimensions (WXDXH) (mm)	720mmX590mmX520mm	740mmX618mmX630mm
Temperature Range (°C)	5°C above ambient to +80 °C
Temperature accuracy	+1°C
Display resolution	+-1°C
Timing range	1~9999min
Shelves (Nos)	2
Power consumption	1100W	1550W
Electrical requirements	220V, 50Hz, Single phase

STANDARD TEST SPACE

Specification	HAO-100	HAO-150	HAO-250
Test space Dimentions (WXDXH) (mm)	450mmx 450mm x 600mm	500mmx 500mm x 650mm	600mmx 600mm x 750mm
Test space Volume (L)	100	150	250
Temperature Range (°C)	above ambient +40°C to +200°C	above ambient +40°C to +200°C	above ambient +40°C to +200°C
Temperature Fluctuation (°C)	+1°C
Electrical Supply	1ø/N/E 230VAC +10% 50Hz
Type of controller	Option PC based software for Data Logging

Technical Specifications:

Catalouge No	CRB-20LTR
capacity	16 bags
volume	20liters
Temperature	4.0°C
Accuracy	+-0.5 °C
Input Voltage	230v AC
suitable Fluids	D.M.Water

Model	bath	control	Concentric Rings	Heating
CR6	302010 cm	Digital	6 holes of 75 mm with steps of 25 mm	800w*1
CR12	403010 cm	Digital	12 holes of 75 mm with steps of 25 mm	800w*2
CR24	604010 cm	Digital	24 holes of 75 mm with steps of 25 mm	1500w*2

<br />

Chamber Operation	Both the chambers are independently operable and can be synchronized for one common operation.
Performance	To carry out steady state as well as Cyclic Temperature tests : A. Climatic tests B. Rain test C. IR test with black body test D. Dual test
Temperature range	-40℃～+150℃ in both chambers with 1% accuracy
Work Space	Work room 1- Inner size 2184 Litter – 1300 mm W x 1500 mm D x 1200 mm H Work room 2- Inner size 2184 Litter – 1300 mm W x 1500 mm D x 1200 mm H
External dimensions	3175 x 2375 x 2450 (WxHxD)
Humidity	20 – 98 % RH / ± 3 % RH limited by minimum the Climatic range of + 25^OC to +80^OC.
Infrared Light test setup	9 IR lamps with Irradiation Power range : 1200 W/m² to 500 W/m² in the 1300 x 700mm target area automatically controlled with the Block sensor method
Water Spray test setup	Nozzle – 4nos (over all flow rate 30L/M) Water temp 5 deg to ambient Spray water pressure: 2.9 Bar (290 Kpa)
Control system	Siemens PLC 2 Nos with one PC & software
Construction Features	Interior SS304 sheet thickness – (1.5mm) Stainless Steel Argon arc welded
Chiller	2 chiller units for condenser cooling & spray water cooling are included
Exterior	Outer MS sheet thickness 1.5 mm with powder coated
Insulation	125 mm thick Puf/Glass wool insulation
Doors	1. Front side two number door size 1100 mm W x 1000mm H with Viewing window 300 x 400 mm 2. Left & right side each One number Door 800 mm W x 1000 mm H
Power source inside chamber	Aplab made Power source 60V/30A : DC power source (Adjustable)
Temperature uniformity	≤2℃（empty load and constant state）
Temperature deviation	±2℃（empty load and constant state）
Humidity Deviation	+2～-3％（＞75％RH）
Humidity Deviation	±5％（≤75％RH）
Heating up time	Less than 90 min（20℃ → +130℃, average rate ≥2℃ /min during the whole test, empty chamber）
Cooling down rate	Less than 90 min（20℃ → -40℃, average rate ≥ 1℃ /min during the whole test, empty chamber）
Water cooling time	Time for spray water cooling down: +25～+5℃ , 80L water requires 60 minutes.
Port holes	2 Nos. 100mm both sides
Partition door	Partition Door Dimension 1300 mm W x 800 mm H – made with FRP material
Silicon Gasket	Double gasket, one on the chamber and one on the door.
Hinges & Latches	Heavy duty hinges with toggle type locking arrangement.
Mounting	Floor mounting type with wheel.
Noise	Max 80 dB

Model	W-ETC
Size	200 to 8,000 cu. ft. (5,600 to 226,500 liters) of work space Custom Sizes Available
Temperature Range	Single Stage: -34°C to +190°C (-30°F to +375°F) Range: -45°C to +190°C (-50°F to +375°F) II Range: -50°C to +190°C (-58°F to +375°F) Cascade: -70°C to +190°C (-94°F to +375°F)
Optional Humidity Range	10% to 95% RH

Product Model	IP-X9K-500C	IP-X9K-1000C	IP-X9K-1250C
Volume	500 Liters	1000 Liters	1250 Liters
Test Room (WxHxD) mm	800800800	100010001000	100012501000
External Dimension (WxHxD) mm	130011501800	150019501300	150015501950
Sample Test Distance	100mm~150mm	100mm~150mm	200mm~400mm
Test Sample Load Weight	10KG~ 15 KG	15KG~ 20 KG	20KG~ 40 KG
Water Pressure	8000Kpa~10000Kpa	8000Kpa ~10000Kpa	80 Bar~100 Bar
Water Spray Angle	0°, 30°, 60°, 90°
Nozzle Design	Custom SS 304 four fan nozzles made of stainless steel, located at 0°, 30°, 60°, 90° of the test platform level
	The distance between the nozzle and the test object is 100~150mm, and the distance between the nozzle and the test plate can be adjusted.
	The maximum movement distance of the nozzle is 300mm, and the Angle error is every 50mm
Injection Design	Each IPX9K nozzle is equipped with high pressure and high temperature actuating solenoid valve, and the actuating time of each Angle is 10 seconds (it can be set and changed for 0-5min)
	The IPX9K nozzle can set the injection time and stop time, and spray in turn (0-1000 cycles can be set)
Spray Nozzle	Four Units, 30 seconds each position
Spray Range	30° ± 5°(Single hole)｜Space 100-150mm
Water Spray Temperature	Room temp +10°C ~ 88°C (Adjustable)
	Hot water storage tank temperature can reach 88 ℃ (hot water injection test, high pressure hot spray)
Sight Window	Equipped with 10 mm reinforced glass and explosion-proof transparent protective film, the internal lighting adopts isolated lighting
Water Flow Rate	14 L-16 L/min
Testing Sample Shelf	SS 304, Speed: 5 ±1 r.p.m
Shelf Height	200-400 mm, Rotate 360 degrees horizontally
Test Platform Diameters	550 mm, 600 mm (Options)
Ambient Temperature	5 ℃ ~ + 32 ℃｜Ambient humidity:≤85%
Power Requirements	AC 415/N/E（ ±10%）V/50HZ Three-phase Five-wire system

TECHNICAL SPECIFICATIONS

Temperature and Humidity Test Chamber Specification

Technical Description of the Infrared System

Irradiation Parameter

Irradiation Spectrum:

VIS: 6 % (380 – 780 nm)

IR-A: 46 % (780 – 1.400 nm)

IR-B: 44 % (1.400 – 3.000 nm)

IR-C: 4 % (3.000 – 10.000 nm)

Irradiation Distance: approx. 600 mm from bottom lamps to target area

Irradiation Power: 1200 W/m² to 100 W/m² in the target area

Integrate the dimmer pack into your chamber controlDual Climatic test Chamber Combined with Rain and IR lamp Test

Parameter	3-Phase	1-Phase / 2-Phase
Rating	3kVA to 3500kVA	1kVA to 20kVA
Reference Standard	IS 11171 : 1985 (Reaffirmated 2006)
Type of Transformer	Floor mounted, natural air-cooled /oil-cooled (depending on rating)	Dry type, floor mounted, natural air-cooled
Configuration	Delta / star 1:1 (or as per user specification)	1:1 (or as per user specification)
Default Vector Group	Dyn11
Type of lamination	CRNO / CRGO
Load Regulation	Better than 3%
Class of insulation	Class H
Efficiency	3 – 12 kVA (>95%)> 15 kVA (>97%)At rated input voltage and at 100% rated current of loads that are linear
Insulation strength	Withstands 2.5 kV for 1 minute (between windings & between windings and body)
DC galvanic isolation	>1000 Mega Ohms – for UIT >100 Mega Ohms – for GIT
Common Mode noise rejection (for UIT only)	Up to 10kHz > 100 dB 10 kHz to 50 kHz > 60 dB 50 kHz to 1 MHZ > 40dB
Short Circuit Protection Indications	HRC fuse at input provided as a standard upto 200kVA
Indications	LED Lamps for Output Presence
Housing	Sheet metal housing provided with Input / Output terminations
Standards	IS 2026 Standards

SAVE ENERGY	Track Daily Energy Consumption	Set Energy Targets
	Monitor Deviations	Monitor PF and load variations
	Monitor Night time Wastages	Get Alarms for low PF
SAVE TIME	Receive daily Energy reports on your Mobile APP	Save engineer’s time for data collection
IMPROVE PERFORMANCE	Monitor Stabiliser Performance	Monitor Unbalances
IMPROVE PERFORMANCE	Get Alarms for Stabiliser TRIP	Get Alarms for Low/high voltage and overload

Feature	3 Phase Unbalanced Air cooled(AU/AR Models)	3 Phase Unbalanced Oil cooled(OU/OR Models)
Rating (kVA)	3-500	3-4000 (OU)/ 15-500 (OR)
Type of cooling	Air	Oil
Input voltage range (V L-L)*	310-480 / 340-480 / 360-460
Output voltage (V L-L)*	415 (380V/400V – optional)
Output Voltage Regulation	1% of nominal output voltage
Input frequency range	47Hz — 53Hz
Efficiency	>97%
Effect of Load Power Factor	Nil
Waveform Distortion	Nil
Type of Servo Control	Micro Controller based True RMS sensing and correction
Servo Motor Drive	Triac based drive for AC Step Synchronous motor
Under/ Over Voltage cutoff *	Electronic cutoff circuit with graded time delay, set @ +5% /-10% of nominal output voltage
Overload cutoff	CT based Electronic cutoff circuit with graded time delay set @ 110% of rated full load current
Short circuit protection	MCB / MCCB provided up to 100 kVA HRC fuse provided for 125-200 kVA
Single phasing prevention	Provided in AU/OU models only; Not provided in the AR/OR models
Phase Reversal Trip	Provided in AU/OU models only; Not provided in the AR/OR models
Stabiliser bypass	Provided up to 50 kVA 3-phase; Optional > 50 kVA
Transient Suppression	Spike Suppression through MOV is provided (Surge Arrestor is optional)
Emergency Off Switch	Provided in AU/OU models only; Not provided in the AR/OR models
Frequency cut off protection	Optional
Input High Voltage Trip	Optional
Resetting mode	Manual / Auto option provided with programmable time delay
Display Type	2 Line LCD Panel
Parameters displayed	Input & Output Voltages (Line & Phase), Output Currents & Frequency
Input / Output Terminations	Bolted Terminals up to 100kVA, Busbar 125kVA and above
Standards	IS 9815 (Part – 1) : 1994

MODEL	SX-030	SX-040	SX-060	SX-080	SX-100	SX-120
Capacity	30kVA 27kW	40kVA 36kW	60kVA 54kW	80kVA 72kW	100kVA 90kW	120kVA 108kW
INPUT
Rated Voltage	400Vac
Voltage Range	± 25%
Rated Frequency	50 / 60 Hz
Frequency Range	50 / 60 Hz ± 5 Hz
Bypass Voltage Range	± 20% (settable)
Delayed Start of Rectifier	1 ~ 300 s (settable via display panel)
ECO Voltage Range	± 10% (settable)
OUTPUT
Voltage	380V / 400V / 415Vac
Voltage Regulation	± 1%
Frequency	Synchronized with utility in mains mode; 50 / 60 H± 0.1% in battery mode
Waveform	Sinusoidal
Power Factor	0.9
Crest Factor	3:1
Total Harmonic Distortion (THDV)	≤2% (linear load); ≤5% (non-linear load)
Transfer Time	AC mode to battery mode: 0ms
	Inverter mode to bypass mode: 0ms
	Inverter mode to ECO mode: 5 ~ 10ms
Overload	105%: long time running, 105% ~ 110% for lh,
Overload	110% ~ 125% for 10 min, 125% ~ 150% for 1 min, 150% ~ 200% for 200ms, >200% for 100ms
BATTERIES
DC Voltage	12V x configured battery number (settable via display panel)
Number of Battery	28~32 pcs (settable)
Charging Current	10A default / settable
Charging	Three-stage charging, auto switch floating / equalizing charge
Battery State Display	Display battery backup time, battery remaining capacity
Battery Self-test	Settable periodic self-test; manually configurable test time and voltage
SYSTEM
Efficiency	Online mode:upto 93%; ECO mode:98%≥
Parallel Numbers	max6
Protections	Short-Circuit, Overload, Over-voltage, Under-voltage, Low Battery, Over-temperature, Fan fault
Communications	RS232 / RS485 / Dry Contacts (standard), SNMP (optional)
IP Rating	IP20
EMI	EN62040-2
EMS	IEC61000-4-2(ESD), IEC61000-4-3(RS), IEC61000-4-4(EFT), IEC61000-4-5(surge)
OTHERS	SX-030	SX-040	SX-060	SX-080	SX-100	SX-120
Humidity	0 ~ 95% RH @ 0 ~ 40°C (non-condensing)
Noise Level	55dB		60dB		85dB
Dimensions (W x D x H) (mm)	400 x 800 x 1100		600x700x1500		700 x 800 x 1700
Packaged Dimensions (W x D x H) (mm)	490 x 920 x 1250		700x800x1850		800 x 900 x 1850
Net /Gross Weight (kg)	210/252	260/302	460/480	590/620	630/660	690/720

MODEL		HX-80	HX-100	HX-120	HX-160	HX-200	HX-250	HX-300
Capacity		80kVA	100kVA	120kVA	160kVA	200kVA	250kVA	300kVA
Capacity		72kW	90kW	108kW	144kW	180kW	225kW	270kW
INPUT
Rated Voltage		400Vac
Voltage Range		346V to 456V (full load) 304V to 346V (power derating 10%)
Rated Frequency		50 / 60 Hz
Frequency Range		50 / 60 Hz ± 5Hz
Power Factor		≥0.99
Total Harmonic Distortion (THDI)		≤3%
Input Current-limiting		1.1 times of rated current (0.1 ~ 1.1 settable)
Rectifier delay start		10 s (1 ~ 300 settable)
Bypass Voltage Range		± 20% (settable)
OUTPUT
Rated Voltage		380V / 400V / 415 Vac
Voltage Regulation		± 1%
Frequency		Synchronized with utility in mains mode; 50 / 60 Hz± 0.1% in battery
Waveform		Sinusoidal
Crest Factor		3 : 1
Total Harmonic Distortion (THDV)		≤ 2% (linear load); ≥ 5% (non-linear load)
Transfer Time		0 ms
Inverter Overload Capability		105% ~ 110% for 60 min;
Inverter Overload Capability		110% ~ 125% for 10 min
BATTERIES
DC Voltage		600 Vdc (supports 576 Vdc / 588 Vdc / 612 Vdc / 624 Vdc)
Number of Battery		50 pcs (supports 48 / 49 / 51 / 52 pcs)
Charging Current		Charging rate (settable) x battery capacity (settable) x number of battery group (settable)
Battery State Display		Battery remaining capacity and backup time
Battery Self-test		Settable periodic self-test; manually configurable test time and voltage
SYSTEM
Efficiency Max. Parallel Numbers	Lien mode≥ 93%; ECO mode≥ 98%					Lien mode≥ 94%; ECO mode≥ 98%
Efficiency Max. Parallel Numbers	6
Protections		Short-circuit, Overload, Over Temperature, Over Voltage, Under Voltage, Battery Low Voltage and Fan Failure
Communications		RS232 / RS485 / dry contacts (standard); SNMP (optional)
IP Rating		IP20
Display		5.7 inches LCD touch screen
OTHERS		HX-80	HX-100	HX-120	HX-160	HX-200	HX-250	HX-300
Operating Temperature		0°C to 40°C
Storage Temperature		– 25°C to 55°C (without battery)
Humidity		5% to 95% (non-condensing)
Noise Level at 1 m		< 65 dB
Dimensions (W x D x H) (mm)		800 x 800x 1800			800 x 860 x 1700		1210 x 860 x 1950
Packaged Dimensions (W x D x H) (mm)		900 x 900 x 2050			900 x 1000 x 1950		1300 x 1000 x 2200
Net / Gross Weight (kg)		580 / 630	630 / 680	680 / 730	790 / 810	1135 /1200	1275 /1340	1355 /1420

Particulars	UDF 90	UDF 185	UDF 360
Internal Volume(Liters)	90	185	360
No. of trays	2	3	6
No. of Internal Door	1	2	4
Internal Dimension W x D x H (mm)	400 x 400 x 580	510 x 510 x 730	700 x 510 x 1000
External Dimension W x D x H (mm)	711 x 877 x 1405	820 x 987 x 1560	1010 x 987 x 1830
Operating Temperature Range	-45°C to -86°C
Insulation (CFC free polyurethane foam)	Body : 150 mm sides, 300 mm Back, Door : 110 mm
Temperature Control	Microprocessor PID controller with PT-100 Class A sensor
Optional HMI Display	7″ touch Screen
Power Failure Alarm	Audio Visual Alarm
Door Open Alarm	Audio Visual Alarm in case door open for over one minute
Inner Body Material	S.S. 304 (AISI Grade, Non Corrosive, Non Magnetic)
Outer Body Material	Powder Coated CRCA Steel
Noise Level	Less Than 65 db(A)
Electrical	220-240 volts, 50 Hz, SINGLE PHASE

Platelet Agitator Incubator

Specification	SESS/PI-0	SESS/PI-2	SESS/PI-2
Temperature Range (°C)	15-35°C
Temperature accuracy	±0.1
Timer (min)	0-999
Variation (%)	±0.5
Power (KW)	0.5	0.8	1.35
Interior Dimensions(HxWxD) (mm)	530X390X390	1050X670X600	390X480X300
Overall (HxWxD) (mm)	820X590X390	1500X670X600	680X480X300
Tray size (HxWxD)	950X1090X390	1750X1170X600	390X480X300
Net Weight (KG)	110	180	320

Catalogue No.	PTB-20	R-PTB-20
Capacity	16 bags	16 bags
Volume	20 liters	20 liters
Temperature	37 ºC	4.0 ºC
Accuracy	± 0.2 ºC	± 0.2 ºC
Input Voltage	230 V AC	230 V AC
Suitable Fluids	D.M water	D.M water

Dry Hot Air Oven

Specification	DUST-450	DUST-1000
Chamber volume (Litres)	50	80
Internal Dimensions (WXDXH) (mm)	420mmX395mmX350mm	450mmX400mmX450mm
Internal Dimensions (WXDXH) (mm)	720mmX590mmX520mm	740mmX618mmX630mm
Temperature Range (°C)	5°C above ambient to +80 °C
Temperature accuracy	+1°C
Display resolution	+-1°C
Timing range	1~9999min
Shelves (Nos)	2
Power consumption	1100W	1550W
Electrical requirements	220V, 50Hz, Single phase

Model	Internal	Dimensions in cms						Max No. of Trays
(S)OR(G)	Cu.Ft/Ltrs.	Internal			External
(S)OR(G)	Cu.Ft/Ltrs.	W	D	H	W	D	H
BOD 90 S/G	3/90	45	40	50	60	82	104	3
BOD 200/G	8/200	60	63	60	75	106.5	117	4
BOD 325/G	12/325	60	60	90	75	106.5	147	6
BOD 400 S/G	16/400	60	63	106	75	106.5	163	7
BOD 600 S/G	22/600	80	80	95	95	126.5	154	6
BOD 800 S/G	28/800	80	80	125	95	126.5	187	9
BOD 1000 S/G	32/1000	80	8	157	95	126.5	219	11

<br />

Model No	BBR 60 ltr	BBR 150 ltr	BBR 300 ltr
capacity(no of bags)	60	160	300
Trays	2	4	4
Inner Dimensions(mm)	400(w)430(d)810(h)	555(w)430(d)1310(h)	700(w)520(d)1310(h)
voltage	230VAC/50HZ	230VAC/50HZ	230VAC/50HZ

Name Of The Requirement	Micro Controller Based Blood Bank Refigirator
Control System	Micro controller based temperature indicator cum controller with digitsl display and PT 100 sensor
Alarm	Audio visual alarm if the temperature deviates from the present temperature
Refrigeration System	Hermitically sealed Cfc free emerson/damfose compressor with R 134 a refrigerant
Air Curculation	Motor and blower arrangement to have uniformity temoerature under loaded temperature
Insulation	100 MM thick CFC free PUF insulation
Lighting	Interior illumination for Working area
Observation Code	Inside see through unbreakable acrylic door
Trays	specially degigned for stainless steel baskets
others	castrol wheels MCB,Heavy duty latch with lock and key
power	works on 230 v AC single phase 50HZ
Temperature Recorder	7 days circular chat G-tek
safety features	180 sec compressor ‘on’ delay timer to safe guard the compressor

Model No.	DFV – 245	DFV – 340
Technical Data
Capacity (Liters)	245	340
Temperature Range °C	-16 ° C -24 ° C
Door	1	1
Baskets / Shelves	6	7
External Dimensions (mm)
Width	533	610
Depth	610	635
Height	1448	1854

Model No.	UTC – 265	UTC – 400
Technical Data
No. of Doors	2	3
Capacity (Litters)	265	400
Temperature Range °C	-10 to -20	-10 to -20
Fully Automatic Controller with Temp. Display	LED	LED
Ext. Dimension (W x D x H) in mm	1360 x 700 x 860	1795 x 700 x 860
Int. Dimension (W x D x H)in mm	795 x 580 x 560	1230 x 580 x 560

Stability test Chambers / Humidity test chamber

Specification	ETC-275	ETC-480	ETC-800	ETC-1200
Effective capacity L	275	480	800	1200
Temperature range@20°C	+5~+65	+5~+65	+5~+65	+5~+65
Temperature stability±°C	0.1~0.2	0.1~0.2	0.1~0.2	0.1~0.2
Temperature deviation °C	1.0	1.0	1.0	1.0
Humidity range(std)opt)	40~95%RH	40~95%RH	40~95%RH	40~95%RH
Humidity range(opt) %RH	20~95	20~95	20~95	20~95
Humidity stability ±%RH	1-2	1-2	1-2	1-2
Humidity deviation %RH	3-5	3-5	3-5	3-5
Heater wattage W	450	450	950	950
Cooling capacity@20°C W	250	350	500	800
Interior size(WDH) mm	535×480×950	635×560×1350	935×640×1350	1235×720×1350
Overall size(WDH)mm	640×660×1600	740×740×1972	1040×820×1972	1340×900×1972
Air movement	Horizontal	Horizontal	Horizontal	Horizontal
Shelves (standard/maximum)	2/5	3/7	3/7	3/7

Vibration Combined Climatic Chamber

Specification	Vibro-ETC 400 Vibro-ETC 400C	Vibro-ETC 600 Vibro-ETC 600C	Vibro-ETC 1200 Vibro-ETC 1200C	Vibro-ETC 2200 Vibro-ETC 2200C
Useful area capacity (I)	400	600	1200	2200
Internal dimensions approx. (mm) WIDTH x DEPTH x HEIGHT	700 x 700 x 800	850 x 750 x 950	1000 x 1150 x 1080	1350 x 1350 x 1200
Distance between the bottom of the test space and the floor (mm)	650….1400	650….1400	700….1400	700….1400
Temperature Range (°C) TC _ _ _ _ ETC _ _ _ _ C fluctuation	-40 to 180°C -70 to 180°C ±1…±1.5	-40 to 180°C -70 to 180°C ±1…±1.5	-40 to 180°C -70 to 180°C ±1…±1.5	-40 to 180°C -70 to 180°C ±1…±1.5
Temp. changing rate Heating	5	5	5	5
Temp. changing rate Cooling	5	5	5	5
Humidity range (%) (t= 25/+80°C) fluctuation	10 to 98% ±3…±5	10 to 98% ±3…±5	10 to 98% ±3…±5	10 to 98% ±3…±5
Temp. range for climatic test corrector	20 to 85°C	20 to 85°C	20 to 85°C	20 to 85°C
Supply voltage (Vac)	410V ±10%/50Hz/3 + N + G

Thermal Shock Test Chamber

Specification	TS 25L-B2	TS 64L-B2	TS 120L-B2
Test Basket Zone (W x D x H) in mm	250 x 250 x 400	400 x 400 x 450	500 x 500 x 400
Test Space Dimension (W XD X H) in mm	400 x 400 x 450	550 x 550 x 450	700 x 700 x 450
External Dimension (W x D x H) in mm	900 x 1860 x 2450	1200 x 2150 x 2450	1350 x 2300 x 2450
Hot Zone (°C)	50 to 200	50 to 200	50 to 200
Cold Zone (°C)	-70 to 40	-70 to 40	-70 to 40
Basket Transition Time (Sec)	< 10	< 10	< 10
Recovery Time (Min)	< 5….15	< 5….15	< 5….15
Basket Movement	Vertical	Vertical	Vertical
Type of Controller	Watlow / Siemens PLC/ HMI – SESS Climatic	Watlow / Siemens PLC/ HMI – SESS Climatic	Watlow / Siemens PLC/ HMI – SESS Climatic

Model Number	Interior Dimensions (W x D x H)	Interior Volume	Temperature Range	Humidity Control	Notes
TENSIL 9.7 /-35/RH	12~15″ x 16~28″ x 15~40″	1.7 to 9.7 cu. ft.	-35 to 150°C	Yes	These chambers are customized to fit your testing equipment
TENSIL 9.7 /-35/XX	12~15″ x 16~28″ x 15~40″	1.7 to 9.7 cu. ft.	-35 to 150°C	No	These chambers are customized to fit your testing equipment
TENSIL 9.7 /-60/RH	12~15″ x 16~28″ x 15~40″	1.7 to 9.7 cu. ft.	-60 to 150°C	Yes	These chambers are customized to fit your testing equipment
TENSIL 9.7 /-60/XX	12~15″ x 16~28″ x 15~40″	1.7 to 9.7 cu. ft.	-60 to 150°C	No	These chambers are customized to fit your testing equipment

Parameters:

Model	Temp. Range ( °C)	Temp. Accuracy (°C)	Tank Capacity (L)	Flow Rate (L/min)	Pressure (bar)	Cooling/heating power (W)	Tank Depth (mm)	Tank opening size (W*D mm)	Dimensions (WDH mm)	Weight (kg)
RB201	+5 ~ +95	±1	12	5~10			150	150×300	365×340×340	17
RB101	-15 ~ +95	±1	6	5~10	0.25	200	150	145×130	420×405×400	25
RB105	-10 ~ 95°C	±1	5	5~10	0.25	200	150	145×150	215×405×550	26
RB205	-20 ~ 95°C	±0.5	5	5~10	0.25	200	150	140×145	210×405×560	30
RB305	-30 ~ 95°C	±0.5	5	5~10	0.25	200	150	140×145	215×405×560	33
RB405	-40 ~ 95°C	±0.2	5	5~10	0.25	200	150	140×145	215×405×560	33
RB2012	-20 ~ 95°C	±0.2	12	5~10	0.25	550	200	170×170	280×480×725	42
RB4012	-40 ~ 95°C	±0.1	12	5~10	0.25	550	200	170×170	280×480×725	45
RB012	+5 ~ 99 °C	±0.05	12	5~10	0.25 bar	800	150	150×300	365×340×340	17
RB025	+5 ~ 99 °C	±0.05	25	5~10	0.25 bar	1500	200	300×300	560×350×400	22

<br />

STANDARD TEST SPACE

Specification	DUST-450	DUST-1000
Work Space Volume (L) (MM)	450	1000
Test space Dimensions (WXDXH) (mm)	750mmX750mmX750mm	1000mmX1000mmX1000mm
Temperature Range (°C)	5°C above ambient to +80 °C
Temperature Fluctuation	±1°C
Electrical Supply	3ø/N/E 415VAC +10% 50Hz
Type of controller	PLC based control system

Specification	ETC 1000 / -40 to 150 °c
Power of single channel	50W/CH
Quantity of load channels	110CH
Scope of load voltage	2-100V
Scope of load current	0.2-5A/CH
Load precision	±(1%+0.1%FS)
Qty of Layer	Six – Layer
Height (mm)	1300
Width (mm)	1300
Load Model	Energy Saving
Load mode	Constant voltage load mode + constant current load mode, CC+CV Mode
Control system	Temperature / Humidity control type of PLC with PC software
Temperature range	Temperature -40°C to 150°C
Humidity Range	10 to 98%
Charger power socket	Universal type Power socket
Structure material of trolley	Outer MS with Powder coated / Inner SS304
Mode of main control	Monitoring software for burn-in of computer-monitoring type power
Input mode of UUT	Multi-purpose socket/speaker wire clip/custom design
Interface mode of UUT	Connecting fixture boards (with various specifications) for first choice/custom design
External dimension (LWH)	1540 x 1668 x 1940

Ordering Information

Chamber Body Material	Model	Internal size (MM)	Pow	Voltage	Optional Refrigeration System
		W D H H* KW	V/HZ**
FRP	SST 200	600 500 750 3.5	3.5	3.5 230/50/1+G
FRP	SST 600	900 640 810 1100	4.5	230/50/1+G	Yes
FRP	SST 1200	1700 640 810 1100	5.5	230/50/1+G	Yes
Inner FRP / Outer SS316	SST 2300	2000 1000 1000 1300	7.5	415/50/3/N+G	Yes

<br />

Ordering Information

Chamber Model	Unit	TC/ETC 50 C	TC/ETC 100 C	TC/ETC 250 C	TC/ETC 550 C	TC/ETC 1000 C
Useful Internal capacity available	Litres	50	100	250	550	1000
Internal Dimension Approx in mm	Width x Depth x Height	400 x 300 x 500	500 x 400 x 600	600 x 600 x 750	850 x 7730 x 900	1000 x 1000 x 1000
Temperature range °C IEC 60068-3-5 and IEC 60068-3-6	TC ###	-35 to 180 °C	-35 to 180 °C	-35 to 180 °C	-35 to 180 °C	-35 to 180 °C
Temperature range °C IEC 60068-3-5 and IEC 60068-3-6	ETC ### C	-70 to 180 °C	-70 to 180 °C	-70 to 180 °C	-70 to 180 °C	-70 to 180 °C
Control Accuracy (±°C)	(±°C)	0.1°C	0.1°C	0.1°C	0.1°C	0.1°C
Cooling Ramp Rate Average (Empty chamber)	°C/min	3°C	3°C	3°C	3°C	3°C
Heating Ramp Rate Average (Empty chamber)	°C/min	3°C	3°C	3°C	3°C	3°C
Humidty range %	%	20/95 %	20/95 %	20/95 %	20/95 %	20/95 %
R.H. Fluctuation	+/- %	+/- 3 %	+/- 3 %	+/- 3 %	+/- 3 %	+/- 3 %
Supply		230V +6/-10% / 50Hz / 1+G	415V +6/-10% / 50Hz / 1+G	415V +6/-10% / 50Hz / 1+G	415V +6/-10% / 50Hz / 1+G	415V +6/-10% / 50Hz / 1+G
Refrigerating gas		R404A/R23	R404A/R23	R404A/R23	R404A/R23	R404A/R23
Max. noise level with air condenser		78d8 (A)	78d8 (A)	78d8 (A)	78d8 (A)	78d8 (A)
Compressor		Hermetic	Semi Hermetic	Semi Hermetic	Semi Hermetic	Semi Hermetic
Control system based on customer request		Non Profile / Profile controller / PLC with HMI	Non Profile / Profile controller / PLC with HMI	Non Profile / Profile controller / PLC with HMI	Non Profile / Profile controller / PLC with HMI	Non Profile / Profile controller / PLC with HMI
Front Glass window		200mm x 300mm	200mm x 300mm	300mm x 500mm	300mm x 500mm	300mm x 600mm
Condenser		Air cooled /Water cooled	Air cooled /Water cooled	Air cooled /Water cooled	Air cooled /Water cooled	Air cooled /Water cooled

MODEL	SX-030	SX-040	SX-060	SX-080	SX-100	SX-120
Capacity	30kVA 27kW	40kVA 36kW	60kVA 54kW	80kVA 72kW	100kVA 90kW	120kVA 108kW
INPUT
Rated Voltage	400Vac
Voltage Range	± 25%
Rated Frequency	50 / 60 Hz
Frequency Range	50 / 60 Hz± 5 Hz
Bypass Voltage Range	± 20% (settable)
Delayed Start of Rectifier	1 — 300 s (settable via display panel)
ECO Voltage Range	± 10% (settable)
OUTPUT
Voltage	380V / 400V / 415Vac
Voltage Regulation	± 1%
Frequency	Synchronized with utility in mains mode; 50 / 60 H± 0.1% in battery mode
Waveform	Sinusoidal
Power Factor	0.9
Crest Factor	3:1
Total Harmonic Distortion (THDV)	<_2% (linear load); <_5% (non-linear load)
Transfer Time	AC mode to battery mode: Oms
	Inverter mode to bypass mode: Oms
	Inverter mode to ECO mode: 5 — 10ms
Overload	105%: long time running, 105%— 110% for lh,
Overload	110% — 125% for 10 min, 125% — 150% for 1 min, 150% — 200% for 200ms, >200% for 100ms
BATTERIES
DC Voltage	12V x configured battery number (settable via display panel)
Number of Battery	28 ~ 32 pcs (settable)
Charging Current	10A default / settable
Charging	Three-stage charging, auto switch floating / equalizing charge
Battery State Display	Display battery backup time, battery remaining capacity
Battery Self-test	Settable periodic self-test; manually configurable test time and voltage
SYSTEM
Efficiency	Online mode:upto 93%; ECO mode:98%
Parallel Numbers	Max 6
Protections	Short-Circuit, Overload, Over-voltage, Under-voltage, Low Battery, Over-temperature, Fan fault
Communications	RS232 / RS485 / Dry Contacts (standard), SNMP (optional)
IP Rating	IP20
EMI	EN62040-2
EMS	IEC61000-4-2(ESD), IEC61000-4-3(RS), IEC61000-4-4(EFT), IEC61000-4-5(surge)
OTHERS	SX-030	SX-040	SX-060	SX-080	SX-100	SX-120
Humidity	0 ~ 95% RH @ 0 ~ 40°C (non-condensing)
Noise Level	55dB		60dB	85dB
Dimensions (W x D x H) (mm)	400 x 800 x 1100		600x700x1500	700 x 800 x 1700
Packaged Dimensions (W x D x H) (mm)	490 x 920 x 1250		700x800x1850	800 x 900 x 1850
Net / Gross Weight (kg)	210/252	260/302	460/480	590/620	630/660	690/720

Industrial Products

Pharma Products

Medical Products

Trading Products

Chamber Diagnostics

Preventive Maintenance Programs

Installations

Spare parts and Materials

Equipment Relocation

Training on proper equipment use and Programming

Rental Programs / used Equipment

Equipment updates

Refrigerant modifications

chamber liner leak test

chamber Modifications

Service on all makes and models

Retrofit

calibration as per ISO 17025

Calibrat to below parameter required + QTY