Salt Spray Test Chamber and Corrosion Test Chamber

Salt Spray Test Chamber and Corrosion Test Chamber

The Basic Salt Spray Test Chamber and Corrosion Test Chamber are designed to be flexible enough to comply with as many different CCT specifications as possible. As standard they come with the ability to create different climates: which may be programmed to occur in any sequence and be repeated automatically. By choosing from a wide range of optional accessories, these climates may be added to as required to further extend the number of climates and conditions that can be created.

Features

• All the models are equipped with a PLC-based control system
• High-resolution dosing and high-precision spraying of the salt solution (atomization)
• Automatic stop of the running test in case of unintentional opening
• Regulating-valve manometer for the control of compressed air flow
• Flow meter for the reading of the salt solution flow
• With or without cooling unit
• Stainless steel humidifier
• Magnetic switch for turning off the spraying when the hood is open

Standards

Standard models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS) or Cupric Acid (CASS).

Advanced model 

Advanced models can perform the same basic salt spray tests, but in addition are equipped with extra features which enable them to undertake ‘modified’ tests such as those defined in ASTM G85. Here conventional salt spray is often combined with one other climate, in a two-part cycle, to accelerate the test. For example: salt spray and condensation humidity  or salt spray and drying  or salt spray and SO2 testing.

Salt Spray Test:

IS 9000, IS5528, IS 6910, ASTM B 117, JIS2371, UNICHEM, DIN ISO 9227 6270
Condensed water test as per ISO 6270, CASS Test, ASTM B 368

Corrosion Test:

PV 1210, VDA 621-415, SAE J 2334, NES CCT – I/II/IV, Renault D17: 2008 ECC1, GMW 14872

Data sheet
Technical specification